Screw clamp terminals 1 1…2.5 mm² – cable stiffness: flexible without cable end Screw clamp terminals 2 1…2.5 mm² – cable stiffness: flexible without cable end Screw clamp terminals 1 1…2.5 mm² – cable stiffness: flexible with cable end Screw clamp terminals 2 1…2.5 mm² – cable stiffness: flexible with cable end Screw clamp terminals 1 1…2.5 mm² – cable stiffness: solid without cable end Screw clamp terminals 2 1…2.5 mm² – cable stiffness: solid without cable end
tightening torque
1.2 N.m – on screw clamp terminals – with screwdriver Philips No 2
control circuit voltage limits
Operational: 0.85…1.1 Uc at 50 Hz Drop-out: 0.3…0.6 Uc
operating time
4…19 ms coil energisation and NC opening 12…22 ms coil energisation and NO closing 4…12 ms coil de-energisation and NC opening 6…17 ms coil de-energisation and NO closing
mechanical durability
10 Mcycles
maximum operating rate
180 cyc/mn
inrush power in VA
70 VA 50 Hz (at 20 °C)
hold-in power consumption in VA
8 VA 50 Hz (at 20 °C)
minimum switching voltage
17 V
minimum switching current
5 mA
non-overlap time
1.5 ms on energisation between NC and NO contact 1.5 ms on de-energisation between NC and NO contact
insulation resistance
> 10 MOhm
mechanical robustness
Shocks control relay open: 7 Gn for 11 ms Shocks control relay closed: 10 Gn for 11 ms Vibrations control relay open: 1.5 Gn, 5…300 Hz Vibrations control relay closed: 3 Gn, 5…300 Hz
height
74 mm
width
45 mm
depth
80 mm
net weight
0.28 kg
Environment
standards
IEC 60947-5-1
product certifications
GOST
IP degree of protection
IP20 conforming to IEC 60529
protective treatment
TH conforming to IEC 60068
ambient air temperature for operation
-20…70 °C
ambient air temperature for storage
-60…80 °C
operating altitude
3000 m without
Country of Origin: India
Additional information
Weight
0.28 g
Dimensions
2 × 5 × 9 cm
Reviews
There are no reviews yet.
Be the first to review “EasyPact TVS Control Relay 2NO+2NC 220V AC Coil” Cancel reply
Reviews
There are no reviews yet.