40 A (at <40 °C) at <= 415 V AC AC-1 for power circuit
control circuit type
AC at 50 Hz wide range
height
74 mm
width
45 mm
depth
80 mm
net weight
0.34 kg
colour
Grey (RAL 7011)
Complementary
auxiliary contact composition
Without
[Uimp] rated impulse withstand voltage
6 kV conforming to IEC 60947
[Ui] rated insulation voltage
690 V conforming to IEC 60947-4-1
overvoltage category
III
Irms rated making capacity
180 A at 440 V AC for power circuit conforming to IEC 60947-4-1
rated breaking capacity
144 A at 440 V for power circuit conforming to IEC 60947
[Icw] rated short-time withstand current
145 A 40 °C – 10 s for power circuit 84 A 40 °C – 60 s for power circuit 40 A 40 °C – 600 s for power circuit
associated fuse rating
40 A gG at <= 690 V coordination type 1 for power circuit
average impedance
2.5 mOhm – Ith 40 A 50 Hz for power circuit
power dissipation per pole
2.6 W AC-1
control circuit voltage limits
Drop-out: 0.3…0.6 Uc at 50 Hz (at <55 °C) Operational: 0.7…1.25 Uc at 50 Hz (at <55 °C)
operating time
12…22 ms on closing 4…19 ms on opening
mechanical durability
10 Mcycles
maximum operating rate
1800 cyc/h 60 °C
inrush power in VA
95 VA 50 Hz cos phi 0.75 (at 20 °C)
hold-in power consumption in VA
8.5 VA 50 Hz cos phi 0.21 (at 20 °C)
heat dissipation
2…3 W for control circuit
electrical durability
0.3 Mcycles AC-1
mounting support
Plate DIN rail
connections – terminals
Power circuit: screw clamp terminals 1 1…4 mm² – cable stiffness: flexible with cable end Power circuit: screw clamp terminals 2 1…2.5 mm² – cable stiffness: flexible with cable end Control circuit: screw clamp terminals 1 1…4 mm² – cable stiffness: flexible without cable end Control circuit: screw clamp terminals 2 1…4 mm² – cable stiffness: flexible without cable end Control circuit: screw clamp terminals 1 1…4 mm² – cable stiffness: flexible with cable end Control circuit: screw clamp terminals 2 1…2.5 mm² – cable stiffness: flexible with cable end Control circuit: screw clamp terminals 1 1…4 mm² – cable stiffness: solid Control circuit: screw clamp terminals 2 1…4 mm² – cable stiffness: solid Power circuit: screw clamp terminals 1 1.5…6 mm² – cable stiffness: solid Power circuit: screw clamp terminals 2 1.5…6 mm² – cable stiffness: solid
tightening torque
Power circuit: 1.2 N.m Control circuit: 1.2 N.m
Environment
standards
IEC 60947-4-1 IEC 60947-5-1
product certifications
EAC
IP degree of protection
IP20 conforming to IEC 60529
protective treatment
TH conforming to IEC 60068
pollution degree
3
ambient air temperature for operation
-5…55 °C
ambient air temperature for storage
-60…80 °C
permissible ambient air temperature around the device
-20…70 °C at Uc
operating altitude
3000 m
fire resistance
850 °C conforming to IEC 60695-2-1
mechanical robustness
Vibrations contactor open: 1.5 Gn, 5…300 Hz Vibrations contactor closed: 3 Gn, 5…300 Hz Shocks contactor open: 7 Gn for 11 ms Shocks contactor closed: 10 Gn for 11 ms
Additional information
Weight
0.6 g
Dimensions
12 × 10 × 4 cm
Reviews
There are no reviews yet.
Be the first to review “4P CONTACTOR 40A AC1 (2NO+2NC) 220V WB” Cancel reply
Reviews
There are no reviews yet.